2 Before Use Before operating the Plasma TV, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement …

CONTENTS: Safety Precautions, Precautions, For Your Safety Reason, Important Safety Instruction, Introduction, Part Names and Function, Installation, Basic Operations, Wide Operations, OSD (On Screen Display) Controls, RS232C Control, Table of Signals Supported, Troubleshooting, Specifications. Safety Precautions Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire.To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before starting the operation. Symbols Various symbols are used in this Installation Manual for the safe and proper use of the product as well as preventing any injury or damage to persons or property. These symbols and their meanings are described below. Please have a good understanding of these matters before reading the main text of the manual. Precautions 1 . Read all safety instructions and the User Manual before using the product. 2. The safety instructions and User Manual should be maintained in good condition for future reference. 3. Unplug the power connector before cleaning the product. A wet cloth is sufficient for the cleaning of the product, never use liquid or spray cleaner for cleaning the product. 4. Always use the accessories recommended by the manufacturer to avoid any risk. 5. When moving the product from an area of low temperature to an area of high temperature, drops of water may condense on the housing. Do not turn on the TV immediately after moving so as not to cause fire, electric shock or component damage. 6. Do not install the product on unstable fixtures or stands. The installation of the product should be conducted in accordance with the instructions and using the support recommended by the manufacturer. 7. Do not remove the earthing pin on the power plug. The product is supplied with a three-pin earthing-type power plug, this plug will only fit an earthing-type power outlet. This is a safety feature, if you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the earthing plug. 8. Avoid overloading the power cord. Using extension cables or the cords of other appliances may cause fire or electric shock…

Source: http://www.aocmonitor-anz.com/

Download PD4264 Plasma TV User Manual