Technical Note 3676A CB1N Basic manual: Workshop Repair Manual 345 and Technical Note 3286A Features of Renault Clio Sport SPL … or in full, of this document or use of the service …

Contents: GENERAL MECHANICAL INFORMATION FOR THE VEHICLE, Mechanical specifications for the vehicle, ENGINE AND TRANSMISSION ASSEMBLY VALUES AND ADJUSTMENT, Capacity – quantity, Accessories belt tension , AXLE ASSEMBLIES VALUES AND ADJUSTMENT, Dimensions, Front axle geometry checking values, Rear axle geometry checking values, Underbody height, Tyres and wheels, Brakes 07B-6 Page, STARTING – CHARGING, Alternator, PETROL INJECTION, Technical specifications, Idle speed correction, Adaptive idle speed correction, Richness regulation, Immobiliser function, Adaptive richness correction, GENERAL INFORMATION, Brake limiter, POWER ASSISTED STEERING, Manual power steering pump. STARTING – CHARGING Alternator. TIGHTENING TORQUES (in daNm). Alternator mounting M10 bolt 4.4 ±±± ± 0.6. Alternator mounting M8 bolt 2.5 ±± ± ± 0.5. REMOVAL Accessing the alternator To access the alternator, remove the accessories belt (see Accessories belt tension section). Removing the alternator Remove: -the alternator mounting bolts (1), -the alternator. CHECKING THE TENSION Connect a voltmeter to the battery terminals and read the battery voltage. Start the engine and increase the engine speed until the voltmeter needle registers a stable regulated voltage. This voltage must be above 13.5 V . Switch on as many power consumers as possible; the regulated voltage should be between 13.5 V and 14.8 V . REFITTING Proceed in the reverse order to removal. Tighten the accessories belt (see Accessories belt tension section).

Source: http://www.renaultalpineownersclub.com/

Download Technical Note 3676A CB1N