Read this manual before installation, maintenance and operating your pop-up furniture improper installation, service and usage could be hazardous and will void the warranty.

TV FRONT INSTALLATION STEP A. Prepare your work area by moving side pieces of the furniture away from the center piece. Prepare your work area by moving side pieces of the furniture away from the center piece. Remove the bag of contents from the lift arm. Screw holes for mounting television are in the center of the television (as shown above). The original screws provided can’t be used. You must use screws that are a quarter inch longer. TV FRONT INSTALLATION STEP B. Attach the red television installation hooks to the adjustable crossarms of the liftbox. A 6mm allen wrench will be needed for adjustments on the arms of the lift. Using the allen wrench adjust your lower crossarm so the distance between the bottom of the cobra arm and the top of the red hooks is equal to the height of the television. X= The height of the television Y= The bottom of the cobra arm to the top of the red hook The measurements of X and Y should be equal. Using your allen wrench, adjust your lower cross arm so it is level. Using your allen wrench, adjust your lower cross arm so it is level. TV FRONT INSTALLATION STEP C. Remove all safety screws that are marked red or yellow on the sensitive shelf. Make sure the wires are installed in the Liftbox before installing T.V. All cables must be secured with cable ties and attached to the sensitive shelf before entering wire management system. All cables must be inserted into the wire management system (as shown in Pictures E&F). (d) Prepare the cables for pluging in (as shown above). (d) Plug the cabels into the proper inputs. TV FRONT INSTALLATION STEP D. Caution: The lower crossarm of the liftbox which the red T.V installation hooks are hanging on must be tightened before beginning T.V installation. Once this is done, you may proceed to place the television onto the red installation hooks on the liftbox with some assistance. To center T.V on the liftbox, measure both sides of the television to assure they are equal in distance from the corners of the sensitive shelf. Place the bolts through the upper crossarm slot into both screw holes in the top center of the TV. Fasten the bolts gently (without force) through the upper crossarm and into the television. Fasten the bolts gently (without force) through the upper crossarm and into the television…

Source: http://www.customshoppefurniture.com/

Download TV INSTALLATION MANUAL